Steelaway 35
email me --->
  • Home
  • Blog
  • Back Story
  • Systems
    • Propulsion >
      • Perkins 4.107 Manual
    • Electrical >
      • Inverters
  • Bio
  • Contact

Ice box continued

2/26/2016

0 Comments

 
Round one of fiberglass work today takes the work from yesterday where I glassed in the top of the icebox and continued the progress by filling in some uneven areas and corners. It takes about 3-4 hrs til it starts to harden and cure.

I just finished round 2 before heading out for supplies and a dinner break. I switched to stranded matt fiberglass and topped the whole thing off. I've been having troubles folding woven cloth over sharp corners. The stranded matt seems to lay down nicely as the epoxy resin soaks in. This should be my last round of fiberglass today. I might throw down some filler compound in spots before I call it a day. My goal is to have gel coat going on tomorrow. I'll also be making a template for the counter top tonight out of scrap pieces of wood and finishing a couple electrical projects.
0 Comments



Leave a Reply.

    boat blog

    Dream it. Design it. Build it. A hobbyist at heart, I'm usually asked, "Wouldn't it be cheaper and easier to just buy that?!?". Sure, but then I wouldn't understand it and appreciate it like only a do-it-your-selfer can!

    Archives

    February 2018
    January 2018
    July 2016
    June 2016
    March 2016
    February 2016
    January 2016
    March 2015
    January 2015
    September 2014
    August 2014
    May 2014
    March 2014

    Categories

    All

    RSS Feed

Proudly powered by Weebly