Steelaway 35
email me --->
  • Home
  • Blog
  • Back Story
  • Systems
    • Propulsion >
      • Perkins 4.107 Manual
    • Electrical >
      • Inverters
  • Bio
  • Contact

Odds and ends...

1/22/2016

0 Comments

 
A bit of a random day today. I just sort of plugged away at a bunch of projects switching when I got to the end of materials on hand. I installed a couple 12v outlets into the helm station. I ran a 12v circuit for the nav station which will provide power for the stereo, ham radio and some task lights.
I cut and installed a few small pieces of tile for the stove and started cutting the stove pipe. I'm realizing I'll need to do some more cutting to allow clearance around the stove pipe. I had to go a little more vertical to accommodate the barometric damper which needs to be installed 12" above the stove top...

I also took advantage of the nice weather and put a first coat of paint on the interior cabin. I focused mainly on the metal areas that will be left exposed.
0 Comments



Leave a Reply.

    boat blog

    Dream it. Design it. Build it. A hobbyist at heart, I'm usually asked, "Wouldn't it be cheaper and easier to just buy that?!?". Sure, but then I wouldn't understand it and appreciate it like only a do-it-your-selfer can!

    Archives

    February 2018
    January 2018
    July 2016
    June 2016
    March 2016
    February 2016
    January 2016
    March 2015
    January 2015
    September 2014
    August 2014
    May 2014
    March 2014

    Categories

    All

    RSS Feed

Proudly powered by Weebly